List Of Materials; Parts Supplied; Parts Not Supplied; Product Dimensions - Elica LI32WA Guide D'utilisation, D'entretien Et D'installation

List of Materials

Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp edges.
WARNING!
Remove the protective film covering the product before putting into
operation.

Parts supplied

• Hood assembly with blower & light bulb already installed.
• Metal grease filter.
• Hardware bag with:
• Use, care and installation guide
• 2 - d5.3 x 20 mm metal washers
• 4 - 6 x 80 mm screws
• 4 - 3.5 x 9.5 mm mounting screws
• 4 - 4.2 x 19 mm mounting screws
• 2 - 10 x 50 mm wall anchors
Parts needed
• Home power supply cable
• ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• 10" round metal vent system
9 ⁄ "
7
8
(25cm)
36" (91.4cm)
42" (106.7cm)
48" (121.9cm)

Parts not supplied

Optional Accessories
1. Duct Cover Kits
6"
height
12"
height
Tools/Materials required
• Level
• Drill with 1¼" (3.2 cm),⅛" (3.2 mm), and
drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips

Product Dimensions

10"
(25.4cm)
11 ⁄ "
13
16
(30.2cm)
18 ⁄
7
8
(48cm)
24 ⁄ "
1
4
(61.6cm)
5
36"
EXXCEK02 ECLCEK07
EXXCEK04 ECLCEK08
Top view
10" (25.4 cm)
"
=
Duct cover view
36" (91.4cm)
42" (106.7cm)
48" (121.9cm)
42" 48"
ECLCEK05
EXXCEK06
⁄ " (7.9 mm)
5
16
36": 12" (30.6 cm)
42": 15" (38.3 cm)
48": 18" (45.9 cm)
2 ⁄ "
1
3
(5.9 cm)
=
11 ⁄ " (30cm)
7
8
6" (15.24cm) or
12" (30.48cm)
18 ⁄ "
7
8
(48cm)