Placing The Conversion Label - Thermador Pro Harmony Série Instructions D'installation

Masquer les pouces Voir aussi pour Pro Harmony Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Observe the bake burner flame through the slots
in the bottom front panel. Look for considerable
"yellow tipping," noting that some small amount
of yellow tipping is normal in the flame
characteristics of burners running with propane
(LP) gas, flame lifting, or lazy flames.
3. Repeat for the auxiliary oven, if applicable.
4. If the bake burner burners perform satisfactorily,
reinstall the kick panel (see page 17).

Placing the conversion label

1. For proper identification and evidence of the
appliance's conversion for propane (LP) gas operation,
affix the provided conversion label in a location next
to the rating labels on the appliance.
Pro Grand conversion label placement
Pro Harmony conversion label placement
Pro Rangetop conversion label placement
2. Use a permanent marker to fill-in the date, name, and
address of your service organization on the conversion
label.
3. Review the "Checklist" on page 7 to ensure that all
steps have been completed.
4. Leave this installation manual and all removed parts
with the owner of the appliance for future use or for
converting the unit back to natural gas.
Page. 23

Publicité

Table des Matières
loading

Table des Matières