Tools Required; Installation Steps; Removing The Front Cover - Detnov CCD-103 Mode D'emploi

Listed below are the basic tools for installation of the panel:
• Screwdriver for terminal blocks.
• Phillips screwdriver for the screws on the front cover.
• Voltmeter.
• Drill and appropriate bits to fix the panel to the wall

3.3.1- Removing the front cover

Unscrew the 2 screws on the front located at the bottom. Once unscrewed, remove
the cover.
3.3.2- Panel location on the wall
Choose a location easily accessible and free of obstacles, where the indicator lights
are easily seen, and the cover can be easily removed. The panel must be located at
a height of 1.5m.
Remember that the weight of the batteries is significant.

3.2- Tools Required

3.3- Installation Steps

7
GB