Mains Connection - Detnov CCD-103 Mode D'emploi

3.3.6- Power up the panel
Do not install the control panel with the power supply connected. Always disconnect
the exterior bipolar magnetothermic switch before working in the panel.
The connection order, for your safety, must always be first the mains and then the
batteries. Do not connect the station to the mains until you have completed the start-up
GB

3.3.6.1- Mains connection

Make the earth cable longer so that in case of abrupt removal it is the last to disconnect.
Insert the wire into the plastic guide tabs using the plastic case, to prevent the wire
coming loose in the case of sudden removal.
Never use the fuses to connect and disconnect the mains power, use the external
circuit breaker.
10