1- Introduction; General Descriptions - Detnov CCD-103 Mode D'emploi

1- Introduction

This manual contains instructions for installation, commissioning and maintenance of
the range of extinguishing conventional control panels conventional, and technical
data.
The extinguishing control panel range consists of a single model with 3 conventional
zones and one extinction block.
It has been designed to serve small and medium-sized installations that require a
fire detection and extinction system, such as businesses, schools, small and medium
enterprises, etc.
The extinguishing panel is designed in accordance with the requirements for fire
detection and alarm systems listed in the standards EN54 Part 2 and 4.
This panel should be installed by qualified personnel who are familiar with the
guidelines of EN54-14.
The extinguishing panel is divided into two areas (left side detection block, right block
extinction block).

1.1- General descriptions

1. Initiation and control detection Area.
2. Initiation and control extinction Area.
3. Connectors for detection block
4. Connectors for extinction block
5. Network Connector
6. Batteries
5
GB