Switching The Oven On And Off - Angelo Po 1G1FA0G Manuel D'utilisation

Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) to light the pilot light.
3 - Keep the knob pressed for about 15 sec. to
prime the thermocouple.
4 - Turn the knob anti-clockwise (pos. 2) to light the
burner.
5 - Turn the knob gradually anti-clockwise to adjust
the power of the flame down to the minimum
setting.
Turning off
1 - Turn the knob clockwise (pos. 3) to turn the
burner off. The pilot light will remain on to allow
the burner to be re-lit.
2 - Turn the knob clockwise (pos. 4) to turn off the
pilot light.
3 - Turn off the knob to ensure safety.
Lighting
Important
At first switch-on, preheat as appropriate.
IT IT
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
GB GB
(pos. 1) while at the same time pressing the pi-
ezoelectric ignition knob (B) repeatedly to light
DE DE
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
FR FR
prime the thermocouple. The pilot light can also
be lit by hand through the hatch (C).
4 - Turn the knob anti-clockwise (pos. 2) to be-
ES
ES
tween the minimum and maximum temperature
and wait for the warm-up time before using the
oven (see table).
English
SWITCHING THE TOP BURNER ON AND OFF

SWITCHING THE OVEN ON AND OFF

A
1
4
- 10 -
1
2
3
4
IDM-39614600700.tif
B A
2
3
IDM-39618300500.tif
A