Safety And Information Signs; Optional Accessories; Safety; Instructions And Warnings For Safety - Angelo Po 1G1FA0G Manuel D'utilisation

SAFETY AND INFORMATION SIGNS

The illustration shows the position of the signs pro-
vided.
A)Nameplate with manufacturer and appliance
data.
B)General hazard: read the manual carefully be-
fore carrying out any procedure.
C)General hazard: when washing the appliance do
not point pressurised water jets at internal parts.
D)General hazard: all relevant regulations must be
complied with. "Install in compliance with the rel-
evant regulations and use in well ventilated
premises only".
E)General hazard: all relevant regulations must be
complied with. "No liability is accepted in case of
failure to comply with the installation and com-
missioning instructions".
F) Burn hazard: watch out for hot surfaces.

OPTIONAL ACCESSORIES

The appliance can be equipped with the following
accessories on request ("see general catalogue").

INSTRUCTIONS AND WARNINGS FOR SAFETY

– During design and construction, the manufactur-
er has paid special attention to factors which may
cause risks to the health and safety of the people
interacting with the appliance. As well as comply-
ing with the relative legal requirements, he has
adopted all the "rules of good construction prac-
tice". This information is provided to encourage
users to take special care in order to prevent all
risks. However, there is no replacement for care
and attention. Safety also depends on all the op-
erators who interact with the appliance.
– Read the instructions provided in the manual
supplied and those applied to the appliance itself
with care, paying special attention to those relat-
ing to safety.
Important
Do not modify the equipment in any way.
A
G)CE marking: this indicates that the equipment is
compliant with all relevant laws applicable to the
product.

SAFETY

– Take care not to knock or drop the appliance dur-
ing transport, handling and installation, to avoid
damage to its components.
– Never tamper with, elude, eliminate or bypass
the safety devices installed. Failure to comply
with this rule may cause serious risks to health
and safety. Any change and/or tampering with
the equipment or the security devices will invali-
date the CE marking and entail the forfeiture of
the guarantee off ered by the manufacturer.
– Even after you have read all the appropriate doc-
umentation, if necessary on first use carry out a
few trial operations to get to know the controls,
especially those used for switching on and off.
– Use the appliance only for the functions intended
by the manufacturer. Improper use of the equip-
ment could result in risks to the health and safety
of people, damage to nearby goods and fi nancial
losses.
- 7 -
F
D
E
G
C B
IDM-39618300300.tif
3
IT
GB
DE
FR
ES
English