Care And Maintenance - Raychem HWAT-ECO Mode D'emploi

Temperature sensor
Selectable temperature
Pre-programs
BMS interface
Master/Slave
Approval
EMC
Circuit breaker
Real Time Clock
Clock backup time
Clock accuracy
Settings
Operating temperature
Housing material
Heat and fire resistance
category (DIN EN 60730/
VDE 0631-1)
Temperature for bal pressure
test (DIN EN 60730/
VDE 0631-1)
Rated impulse voltage
(DIN EN 60730/ VDE 0631-1)

1.3 Care and maintenance

To clean the HWAT-ECO use a soft cloth, water and soap, do not use sol-
vents. Do not pour water directly on the device. Do not use a water hose or
high pressure cleaner.
In case of defect please return the unit to a qualified repair service or to
the local Tyco Thermal Controls representative.
Standard PTC type KTY 81-210
Optional PT100 (0.39 Ohm/deg and
2-wire only)
37°C up to 65°C in 48 blocks per day.
7 editable built-in building specific
pre-programs
0 – 10 V DC
Master is selectable in the unit, up to
8 slaves can be connected
VDE according to EN60730
According to EN 50081-1/2 for emission
and EN50082 - 1/2 for immunity
max. 20 A, C-Characteristic
Automatic Summer/Winter time and
Leap year correction
Minimum 1 year with lithium battery
model 2025
+/– 10 minutes per year
All settings are stored in non-volatile
memory.
0°C to 40°C ambient
ABS
D
+100°C
Overvoltage category III
9