Finishing; Safety Screen & Door Removal / Installation - Napoleon BL36 Instructions D'installation Et D'opération

6.0 FINISHING

IF FINISHING THE FRONT OF THE APPLIANCE, IT MUST BE FINISHED WITH ANY NON-COMBUSTIBLE
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
6.1 SAFETY SCREEN & DOOR REMOVAL / INSTALLATION
THE DOOR LATCHES ARE PART OF A SAFETY RELIEF SYSTEM AND MUST BE PROPERLY ENGAGED.
FACING AND/OR FINISHING MATERIALS MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRE OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL TO
THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the
appliance and must be installed.
Before the glass door can be removed, the safety screen must be removed. Slide the safety screen
off the 2 pins and remove from the appliance.
Leave a hand on the glass door during entire door removal. The glass
door is secured to the fi rebox with four spring latches. Pull the handles
of the latches forward, then lift the latches out from the door frame to
release the door. Next, pivot the door forward until the top edge clears
the front of the appliance. Carefully grip the sides of the door lifting it
off the appliance.NOTE: These spring latches make up the spring
relief system for the appliance. Ensure the door opens freely and
closes sealed.
NOTE: When mounting the door, ensure there is equal space on
both left and right side. This allows for easy installation of the
front.
Reverse these steps to re-install the door and safety screen. Ensure
safety screen is installed correctly.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
MATERIAL SUCH AS BRICK, MARBLE, GRANITE, ETC.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
DO NOT OPERATE THE APPLIANCE WITH LATCHES DISENGAGED.
WARNING
!
RISK OF FIRE!
WARNING
!
SPRING
LATCHES
37
72.1B
75.1
PIN
W415-1442 / C / 06.06.16
EN