5.5 RECESSED INSTALLATION
INSTALLING A TELEVISION OR OTHER ELECTRONICS ABOVE THE APPLIANCE MAY CAUSE
DISCOLOURATION, MELTING OR DAMAGE TO THE ELECTRONICS. USE MINIMUM CLEARANCES AS
GUIDELINES AND REFER TO YOUR ELECTRONIC MANUFACTURER'S INSTRUCTIONS FOR FURTHER
Before placing anything above a heat source, it is advisable to follow proper clearances and
manufacturer's instructions.
A.
When a mantel is installed between the appliance and an electronic device or other materials, the
effect of direct heat on the electronics or other materials will be reduced. Follow mantel height and
depth instructions for proper clearances. NOTE: Increasing the horizontal length of the mantel will
further reduce the intensity of heat on the electronics.
B.
Refer to "MINIMUM MANTEL CLEARANCES" section for more detailed mantel clearance information.
WARNING
!
INFORMATION.
CLEARANCES CHART
A
6" (152mm) MAX
B
44" (1117mm) MIN
B
W415-1442 / C / 06.06.16
35
EN