WARNING
!
•
Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
•
Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
•
The logs are fragile and should be handled with care.
PHAZER™ logs and glowing embers, exclusive to Napoleon, provide a unique and realistic glowing effect that is differ-
"PHAZER™ logs [and glowing embers], exclusive to Napoleon/Continental, provide a unique and realistic
ent in every installation. Take the time to carefully position the glowing embers for a maximum glowing effect. Log colours
glowing effect that is different in every installation. Take the time to carefully position the glowing embers for a
may vary. During the initial use of the appliance, the colours will become more uniform as colour pigments burn in during
maximum glowing effect. Log colours may vary. During the initial use of the appliance, the colours will become
the heat-activated curing process.
more uniform as colour pigments burn in during the heat-activated curing process."
Insert only if
applicable ---->
Burner Ports
IF APPLICABLE, INSERT DRAWING OF BURNER/SUPPORT WITH APPROPRIATE LA-
IF NOT APPLICABLE, HIDE THIS SECTION AND USE BOXES BELOW.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada •
BLKEX36 Birch Log Placement
If applicable, insert the following statement:
note:
Log numbers are located on the bottom or back of the logs.
Pilot
A1
BELS (I.E. STUDS, PILOT SHIELD, BURNER PORTS, ETC.).
1st & 2nd
Ember Bed
Grate Post
(Log #4)
Burner Overview
Studs
(Log #1)
A2
3rd & 4th
Grate Post
Lights
(Log #5)
1(866)820-8686
Rear Log
Support
Rear Burner
Front Burner
Floor of
Firebox
W415-2792 / 03.12.20
•
www.napoleon.com