13.3. Using the NAP timer
The device features a countdown timer (e.g. as an indication of the end of a break)
that you can enable in the respective modes DAB, FM, Bluetooth and Auxiliary in-
put (AUX). An intermittent acoustic signal sounds once the set time has elapsed (off,
10 min., 15 min., 30 min., 45 min., 60 min., 90 min. or 120 min.).
The NAP timer can only be set in standby mode.
Ensure that the device is in standby mode.
Press the
play.
An intermittent acoustic signal sounds once the set time has elapsed.
Press any button to switch off the intermittent acoustic signal.
13.4. Using the work light
You can enable the work light.
WARNING!
Risk of damage to the eyes!
Do not look directly into the light source for a longer
period of time during operation. This can damage your
eyes.
Do not look directly into the light source.
Switch off the work light when it is not being used.
13.4.1. Switching on the work light.
Turn the work light so that it is pointing away from the device.
button several times until the desired time is shown on the dis-
DE
EN
FR
IT
NL
69