Emerson LUCERE CF575BQ00 Manuel Du Propriétaire page 7

3. Ceiling Fan Assembly
3.5
Remove and Retain One of the Three #6-32 x 1/4"
Truss Head Screw with Lockwasher from the Lower
Housing Assembly (Figure 5).
Loosen the remaining Two #6-32 x 1/4" Truss Head
Screws with Lockwashers (Figure 5).
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Lower Housing Assembly and the LED
Light Fixture Assembly.
3.6
Carefully tuck all the Wires and Connectors into the
Lower Housing Assembly.
Position the LED Light Fixture Assembly onto the Lower
Housing Assembly.
NOTE: Verify that the wires and connectors are not
trapped between the LED Light Fixture Assembly
and the Lower Housing Assembly.
Rotate the LED Light Fixture Assembly Clockwise to
engage the Two loosened Screws.
NOTE: Verify that the washers are not trapped
between the LED Light Fixture Assembly and the
Lower Housing Assembly.
Reinstall and Tighten the previously removed
#6-32 x 1/4" Truss Head Screw with Lockwasher
(Figure 6).
Retighten all Three #6-32 x 1/4" Truss Head Screws
with Lockwashers to securely attach the LED Light
Fixture Assembly onto the Lower Housing Assembly
(Figure 6).
A spare #6-32 x 1/4" Truss Head Screw with
Lockwasher is supplied in the parts bag, if needed.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the Lower Housing Assembly and the LED
Light Fixture Assembly.
(Continued)
LOOSEN TWO
#6-32 x 1/4" TRUSS HEAD
SCREWS WITH LOCKWASHERS
Figure 5
REINSTALL AND TIGHTEN ONE
#6-32 x 1/4" TRUSS HEAD
SCREW WITH LOCKWASHER
LED LIGHT
FIXTURE
ASSEMBLY
RETIGHTEN TWO
#6-32 x 1/4" TRUSS HEAD
SCREWS WITH LOCKWASHERS
Figure 6
7
REMOVE AND RETAIN ONE
#6-32 x 1/4" TRUSS HEAD
SCREW WITH LOCKWASHER
LOWER
HOUSING
ASSEMBLY
LOWER
HOUSING
ASSEMBLY
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF575