Emerson LUCERE CF575BQ00 Manuel Du Propriétaire page 20

6.4
Place the Lower Inner Shade (no center hole) into the
opening of the LED Light Fixture Assembly.
Align the Three Flat Areas on the top edge of the Lower
Inner Shade with the Three Raised Dimples on the LED
Light Fixture Assembly and turn the Shade Clockwise
until it stops (Figure 31).
NOTE: Periodically check that the Shade is seated
fully clockwise in the LED Light Fixture Assembly.
6.5
Place the Lower Outer Shade (no center hole) into the
opening of the Lower Housing Assembly.
Align the Three Flat Areas on the top edge of the Lower
Outer Shade with the Three Raised Dimples on the
Lower Housing Assembly and turn the Shade Clockwise
until it stops (Figure 32).
NOTE: Periodically check that the Shade is seated
fully clockwise in the Lower Housing Assembly.
You have now completed the assembly of your new Ceiling Fan.
Please call the Technical Support at 1-800-654-3545 if you have any questions about installation and operation of
this Ceiling Fan.
6. Final Assembly
(Continued)
LOWER INNER SHADE
FLAT AREAS (3)
Figure 31
LOWER OUTER SHADE
FLAT AREAS (3)
Figure 32
20
20
LED LIGHT FIXTURE
ASSEMBLY RAISED
DIMPLES (3)
LOWER HOUSING
ASSEMBLY RAISED
DIMPLES (3)
ETL Model No.: CF575