12. Decommissioning; Temporary Shutdown; Change Of Location; Disposal And Scrapping - Sicam SBMV955 Notice Originale

en 50 | SBMV955 | Decommissioning

12. Decommissioning

12.1

Temporary shutdown

In the event of lengthy periods of non-use:
€
Disconnect the SBMV955 from the mains.
12.2

Change of location

€
If the SBMV955 is passed on, all the documentation
included in the scope of delivery must be handed over
together with the unit.
€
The SBMV955 is only ever to be transported in the
original or equivalent packaging.
€
Unplug the electrical connection.
€
Heed the notes on initial commissioning.
€
Use the four bolts to secure the SBMV955 on the
pallet again.
12.3

Disposal and scrapping

12.3.1

Substances hazardous to water

!
Oils and greases as well as refuse containing oil and
grease (e.g. filters) represent a hazard to water.
1. Substances hazardous to water must not be allowed
to enter the sewage system.
2. Substances hazardous to water must be disposed of
in accordance with the applicable regulations.
12.3.2

SBMV955 and accessories

1. Disconnect the SBMV955 from the mains and detach
the power cord.
2. Dismantle the SBMV955 and sort out and dispose
of the different materials in accordance with the ap-
plicable regulations.
The SBMV955 is subject to the European direc-
tive 2002/96/EC (WEEE).
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
€
Make use of the local return and collection
systems for disposal.
€
Proper disposal of the SBMV955 prevents
environmental pollution and possible health
hazards.
| |
656 407 2010-11-22

13. Technical data

13.1

SBMV955

Function
Passenger vehicle wheel
balancing speed
Commercial vehicle wheel
balancing speed
Passenger vehicle wheel
measurement resolution
Commercial vehicle wheel measu-
rement resolution
Noise level
Power output
Voltage
Degree of protection
Pneumatic connection
i
The unbalance is indicated by a 3-digit display. The
unit - ounces (oz) or grams (g) - can be selected by
way of the <MENU> key (refer to Section 10).
13.2

Dimensions and weight

Function
SBMV955 (H x W x D) max.
Weight
13.3

Application range

Function
Rim width
Rim diameter
Maximum wheel diameter
Maximum wheel width
Maximum wheel weight
Maximum lift height
Specification
190 U/min 50 Hz /
230 U/min 60 Hz
42 - 100 U/min
1/5 g (0.05/0.25 oz)
10/50 g (0.1/1.0 oz)
< 75 dB
1,0 kW
Depending on voltage
ordered
(refer to rating plate)
IP 22
800 - 1000 kPa (8-10 bar)
Specification
1950 x 1830 x 900 mm
248 kg
min – max
1" – 20"
10" – 26,5"
1200 mm
650 mm
200 kg
440 mm
Sicam snc società unipersonale