Sbmv955 - Sicam SBMV955 Notice Originale

3.5

SBMV955

11
13
1
3
Fig. 1: SBMV955
Item Designation
1 On/off switch
2 Clamping tool holders
3 Power cord
4 Tray
5 TFT-Monitor and Control-
panel
6 Callipers (manual)
7 Wheel guard
8 Fastening nut
9 Centering flange
10 Wheel lift
10/1 Wheel lift slide
10/2 Pedal
11 Manual vernier caliper
12 Measuring compasses
13 Service unit with com-
pressed air connection
Sicam snc società unipersonale
5
12
4
2
10/2
Functions
Switch-on and switch-off
For storing accessories
For power connection
For storing balance weights and accessories
+ Operation of SBMV955, refer to Section 7
+ Software display (measured values and operating instructions)
+ Recording of rim distance and rim diameter.
+ Determination of positions for attachment of adhesive weights.
+ Protection of operator against flying particles (e. g. dirt, water)
+ Starting and stopping measurement
Centering and attachment of wheel on cone
Wheel attachment.
Lifting device to assist with attachment and removal of wheel
Horizontally adjustable wheel rest
+ Left pedal: Raises the wheel rest
+ Right pedal: Lowers the wheel rest
Measurement and positioning of adhesive weights for Alu2 and Alu3 programs.
Width measurement of the rim for car wheels and for industrial vehicles.
+ Checking/adjustment of operating pressure.
+ Removal of dirt.
+ Oil supply for compressed air system.
Product description | SBMV955 | 31
6
9
8
10
10/1
656 407
en
7
| |
2010-11-22