Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Sicam SBMV955 Notice Originale

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices indicate hazards and their consequen-
ces for the user or surrounding persons. Warning notices
also describe the measures for preventing these hazards.
The signal word has a crucial importance. It indicates
the probability of occurrence and the severity of the
hazard in case of non-compliance:
Signal Probability of
word occurrence
DANGER Immediate
danger
WARN- Possible
impending
ING danger
CAUTION dangerous
Possible
situation
Below you will see an example of the "Live parts"
warning notice by way of example, with the signal word
DANGER:
DANGER – Exposure of live parts on open-
ing the SBMV955!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
€
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
€
Disconnect SBMV955 from the mains be-
fore opening.
1.1.2

Symbols in this documentation

Sym- Designation Explanation
bol
! Attention Warns about possible property damage.
Information Practical hints and other
i
useful information.
1. Multi-step op- Instruction consisting of several steps
2. eration
One-step oper- Instruction consisting of one step.
e
ation
Intermediate An instruction produces a visible inter-
«
result mediate result.
Final result There is a visible final result on comple-
"
tion of the instruction.
Sicam snc società unipersonale
Severity of danger
if instructions not
observed
Death severe
impending or
injury
Death severe
or
injury
Minor
injury
Symbols used | SBMV955 | 29
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible!
DANGER – Exposure of live parts on ope-
ning the SBMV955!
Risk of (fatal) injury or heart failure from elec-
tric shocks on contact with live components
(e.g. master switch, printed circuit boards).
€
Work on electrical installations or equip-
ment is only to be performed by qualified
electricians or trained personnel under the
guidance and supervision of an electrician.
€
Disconnect the SBMV955 from the mains
before opening.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
Direction of wheel rotation
Wheel must turn in direction indicated.
(see chapter 4.6 )
en
| |
656 407 2010-11-22