User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Sicam SBMV955 Notice Originale

en 30 | SBMV955 | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Sicam
Tire Service Equipment". These instructions must be
carefully studied prior to start-up, connection and opera-
tion of the SBMV955 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Sicam Tire Service Equipment". These instruc-
tions must be carefully studied prior to start-up, connec-
tion and operation of the SBMV955 and must always be
heeded.
2.3

Electromagnetic compatibility (EMC)

The SBMV955 satisfies the requirements of the EMC
directive 2004/108/EG.
i
The SBMV955 is a class/category A product as
defined by EN 61 326. The SBMV955 may cause
high-frequency household interference (radio inter-
ference) so that interference suppression may be
necessary. In such cases the user may be required to
take the appropriate action.
| |
656 407 2010-11-22
3.

Product description

3.1

Intended use

The SBMV955 is a wheel balancing machine with me-
chanical attachment for the balancing of passenger
vehicle and commercial vehicle wheels (trucks, buses
and tractors) with a rim diameter of 10" – 26,5", a rim
width of 1" – 20" and a maximum weight of 200 kg. The
SBMV955 is to be used exclusively for this purpose and
solely for the range of applications specifi ed in these
instructions. Any other purpose is not consistent with
the intended use and is therefore not permissible.
i
The manufacturer cannot accept any liability for pos-
sible damage arising from improper use.
3.2

Prerequisites

The SBMV955 must be installed on a flat surface
made of concrete or similar material and anchored in
position.
i
An uneven or vibrating surface can lead to inaccurate
unbalance measurements.
3.3

Scope of delivery

Designation
SBMV955
Fastening nut
Centering flange
Manual vernier caliper
Weight pliers
Measuring compass for industrial vehicles
Calibrating weight (60 gr)
3.4

Special accessories

Designation
Universal flange for continuous regulation
cars, 3/4/5 holes
+ Set of quick-action clamping cones
M10x1.25
Three-arm flange for light commercial
vehicles
Calibration weight (60 gr, certified)
Quick lock-nut
Fisher/Dayton Adapter
Movement flange
+ Single-arm adapter kit
+ Scooter 10 mm shaft kit
4 cones 42-111.5mm kit
Order number
Refer to rating
plate
626 700
636 500
629 400
606 500
652 870
654 377
Order number
654 043
612 100
653 420
654 376
616 200
653 778
654 039
654 060
655 430
655 293
Sicam snc società unipersonale