Luminance Brands CF605BQ00 Mode D'emploi page 8

3. Ceiling Fan Assembly
3.6
Remove and Retain One of the Three #8-32 x 10 mm
Serrated Pan Head Screws from the Light Kit Adapter .
Loosen the remaining Two #8-32 x 10 mm Serrated
Pan Head Screws (Figure 6) .
3.7
Tuck wires into the LED Light Fixture Assembly and
position on the Light Kit Adapter Assembly .
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light kit adapter and the LED light fixture
assembly.
NOTE: For Ease of LED Light Fixture Assembly
Installation: Hold the Motor Coupler, located at
the underside of the Fan Motor Assembly while
installing the LED Light Fixture Assembly.
Rotate the LED Light Fixture Assembly Clockwise to
Engage the Two loosened #8-32 x 10 mm Serrated
Pan Head Screws in the Two Key Slots (Figure 7) .
Reinstall the One previously removed #8-32 x 10 mm
Serrated Pan Head Screw (Figure 7) .
Secure the LED Light Fixture Assembly by tightening
the Three #8-32 x 10 mm Serrated Pan Head Screws
(Figure 7) .
A spare #8-32 x 10 mm Pan Head Screw is supplied in
parts bag, if needed .
(Continued)
Figure 6
Figure 7
8
U.L. Model No.: CF605