Luminance Brands CF605BQ00 Mode D'emploi page 29

9. Installation of No-Light Cover
9.4
Place the No-Light Cover into the opening of the Light
Kit Adapter, aligning the Three Flat Areas on the top
edge of the No-Light Cover with the Three Raised
Dimples on the Light Kit Adapter .
Turn the No-Light Cover Clockwise until it stops
(Figure 46) .
NOTE: Periodically check that the No-Light Cover is
seated fully clockwise in the Light Kit Adapter.
(Sold Separately) (Continued)
LIGHT KIT ADAPTER
RAISED DIMPLES (3)
TURN NO-LIGHT COVER
Figure 46
Please contact 1-800-777-4440 for further assistance
29
NO-LIGHT COVER
FLAT AREAS (3)
NO-LIGHT
COVER
CLOCKWISE
luminancebrands.com
U.L. Model No.: CF605