Luminance Brands CF605BQ00 Mode D'emploi page 10

3. Ceiling Fan Assembly
(Continued)
3.9
GREEN GROUND WIRE
Remove the Hanger Ball by loosening the Phillips Head
PIN
Set Screw in the Hanger Ball until the Ball falls freely
down the 8" Downrod (Figure 9) .
DOWNROD
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 9) .
Retain the Pin and Hanger Ball for reinstallation in
Step 3 .16 .
HANGER BALL
NOTE: Do not loosen the Screw that attaches the
Green Ground Wire to the Hanger Ball.
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 9
3.10
THREE 80" MOTOR
WIRES (UNTWISTED)
Separate, untwist and unkink the Three 80" Motor
Wires .
Route the Three 80" Black, Blue, and White Motor
Wires through the 8" Downrod (Figure 10) .
DOWNROD
Figure 10
U.L. Model No.: CF605
10