Luminance Brands CF605BQ00 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Ceiling Fan Assembly
3.18
Position the Fan Blade with the Two Alignment Tabs
facing Down for installation into the Two Grooves on
top of the Flange . (see Figure 18 enlargement) .
Slide a Blade, holes facing up, onto the flange and seat
against the Fan Motor Assembly .
Mount the Blade to the Flange using Three
#10-24 x 10 mm Flat Head Screws (supplied)
(Figure 18) .
NOTE: Take care not to scratch Fan Motor
Assembly when installing Blades.
Complete the remaining Two Blades installation per the
above instructions .
A spare #10-24 x 10 mm Flat Head Screw is supplied in
the loose parts bag, if required .
WARNING
!
To reduce the risk of personal injury, do not bend
the blades during installation, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
(Continued)
BLADE ALIGNMENT TABS
SIDE VIEW OF BLADE
#10-24 x 10 mm FLAT HEAD
SCREWS (3 per blade)
BLADES (3)
Figure 18
14
GROOVES (2 per flange)
U.L. Model No.: CF605

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cf605grt00Cf605orb00Cf605sw00

Table des Matières