Advanced Bionics Naida CI M90 Manuel D'utilisation page 6

• Do not attempt to pair your sound processor to any accessories while
driving or operating heavy machinery.
• Pair the sound processor to Bluetooth devices only in a secure envi-
ronment, such as at home or in the hearing care professional's office.
• Unwanted paired Bluetooth devices can be overwritten by pairing
with authorized devices or can be deleted during fitting by your co-
chlear implant professional.
• Do not stream audio to your sound processor while driving or operat-
ing heavy machinery.
• Attenuating ambient sounds or adjusting environmental balance
while streaming audio (either with the multifunction button or with the
mobile application) may compromise situational awareness.
• Use your sound processor for hands-free phone use only where per-
mitted by law and only when you will not be distracted from the safe
operation of your vehicle.
• Do not use your Advanced Bionics wireless accessories when in-
structed not to use wireless electronic devices, such as on airplanes.
• Remove your sound processor and headpiece before entering
a room where an MRI scanner is located and prior to having any
surgeries that involve electrocautery and diathermy.
• Remove your sound processor and consult your cochlear implant
professional if uncomfortable sounds are heard or in case of
discomfort, pain or skin irritation.
• If the sound processor or accessories become unusually hot or
warm, discontinue use immediately and contact Advanced Bionics or
your cochlear implant professional.
• Do not use a headpiece, magnet, or any associated part, that is
broken, damaged, or cracked.
• The color cap must be attached when the headpiece is in use.
• Due to increased risk of strangulation, do not use cables longer than
81cm (32") with young children.
• The large Slim HP Color Cap is for use by recipients older than
3 years of age, as this color cap and the Slim HP magnet may
become displaced upon dropping.
• Do not remove or replace the Slim HP cable from the sound processor
or waterproof wearing solution while underwater. If the cable becomes
accidently detached during water use, remove the headpiece and
sound processor from the water and dry both devices prior to
re-connecting the cable to the sound processor.
4