Thermador Professionl Série Mode D'emploi page 53

Turn off power to the oven at the main power supply
1.
(fuse or breaker box).
Remove three screws from oven cavity holding the
2.
rack in place.
Remove oven rack to provide access to the bulb
3.
housing.
Remove screw from top of bulb housing.
4.
Insert the tip of a narrow flat blade screwdriver
5.
between the metal clips at about a 40° angle. The
screwdriver blade must be able to pass between the
metal clips to reach the inner catch.
Push the screwdriver blade inward to disengage the
6.
catch from the slot in the bulb housing. Gently pry the
lens off by moving the screwdriver handle away from
the oven wall.
Support the glass lens cover to prevent it from
7.
falling.The lens should detach easily. Do not attempt to
force it.
Pull the halogen bulb from its socket.
8.
53