Software Update; Information On Data Protection; Wi-Fi ® Module - Thermador Professionl Série Mode D'emploi

Touch "Open settings".
3.
Swipe to the left or right to select "Remote Control".
4.
Touch the bottom line to select "On" or "Off".
5.
Touch the ; field to return to the Home Connect
6.
settings menu.

Software Update

Using the software update function, your oven's software
can be updated (e.g. for the purpose of optimization,
troubleshooting or security updates). To do this, you
need to be a registered Home Connect user, have
installed the app on your mobile device and be
connected to the Home Connect server.
As soon as a software update is available, you will be
informed by the Home Connect app, from which you will
also be able to download the update.
Once the update has been successfully downloaded, you
can start installing it via the basic settings of your oven,
or the Home Connect app if you are on your local area
network.
The Home Connect app will notify you once installation is
complete.
Notes
You can continue to use your oven as usual while
▯
updates are downloading.
Depending on your personal settings in the app,
▯
software updates can also be set to download
automatically.
We recommend that you install security updates as
▯
soon as possible.

Information on Data Protection

When your appliance is connected to a WLAN network
that is connected to the Internet for the first time, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
Unique appliance identification (consisting of
▯
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
Security certificate of the Wi-Fi communication module
▯
(to ensure a secure data connection).
The current software and hardware version of your
▯
domestic appliance.
Status of any previous resetting to factory settings.
▯
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Wi-Fi Module
®
FCC/IC Statements
Model: COM2
FCC ID: 2AHES-COM2
IC: 21152-COM2
The Home Connect module is a communication device
designed to provide communication between appliances
and smart devices.
This module is integrated at the factory, under direct
control of BSH Home Appliances Corporation, and is not
user servicable or upgradable. At least 7
separation distance should be maintained from device to
user.
FCC COMPLIANCE STATEMENT
CAUTION
9
Changes or modifications not expressly approved
could void your authority to use this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference, and
1.
This device must accept any interference received,
2.
including interference that may cause undesired
operation.
INDUSTRY CANADA STATEMENT
This device complies with Industry Canada license-
exempt RSS standard(s).
Operation is subject to the following two conditions:
This device may not cause interference, and
1.
This device must accept any interference, including
2.
interference that may cause undesired operation of the
device.
Operation in the band 5150-5250 MHz is only for indoor
use to reduce the potential for harmful interference to co-
channel mobile satellite systems.
/ inch (20 cm)
7
8
31