Amprobe MT-10 Mode D'emploi page 10

3
1.800.561.8187
3. Performing Measurement
a) For temperature measurements, the display
shows the present environment temperature
directly.
b) To perform moisture measurements, drive
the probes into the wood or material to be
measured, read the reading on the display.
4. Automatic Power-Off Feature
a) In wood moisture or material moisture
measurement mode, if you don't operate the
instrument (or the reading does not change)
for about 1 minute, the instrument will turn off
automatically.
b) In Celsius or Fahrenheit temperature
measurement mode, the instrument will turn
off automatically about 1 minute later. After
the instrument is turned on, pressing the button
turns on the backlight. About 15 seconds later,
the backlight turns off automatically.
5. MOISTURE READINGS (LED)
Green - indicates "air-dry" conditions.
Yellow - indicates increased moisture.
Red - indicates excess moisture.
4
www. .com
information@itm.com