Care And Cleaning - SOLIS PRESTIGE 837 Mode D'emploi

REASSEMBLING YOUR BLENDER FOR CLEANING,
CARE AND STORAGE
Reassembling your blender jug
after cleaning
Step 1.
Ensure all parts are clean and completely dry.
Fig. 1
Be careful when handling the BLENDING blades as they are sharp.
Mishandling of the blades may cause injury.

CARE AND CLEANING

Cleaning the motor base
• Wipe the motor base with a soft, damp cloth
then dry thoroughly.
• Wipe any excess food particles from the power cord.
Do not use abrasive scouring pads or cleaners
when cleaning the motor base as they may scratch
the surface.
Cleaning the blender jug, lid, inner lid
and blade assembly
• Wash all parts in warm soapy water with a soft
cloth. Use a kitchen bottle brush to dislodge
stubborn foods. Rinse and dry thoroughly.
The blender jug can be washed on a normal cycle
in the dishwasher. Remove the lid and blade
assembly before placing the blender jug in the
The blending blades are extremely sharp. Avoid any contact with fingers and hands.
Use caution when handling and storing.
Step 2.
To reassemble the blender, replace the silicon seal
onto the blade assembly (see Fig 1). Upturn the
blender jug and insert the blade assembly housing
into the jug base (see Fig 2). Twist the Blade Re-
moval System anticlockwise in the direction of the
indicator symbol until firmly locked into position.
Fig. 2
dishwasher upside down. If not placed upside
down the dishwasher heating element may
damage the jug base.
Removing stubborn or strong food stains
and odours
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odour or
stain on the blender jug and lid. To remove, soak
blender jug and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Solis Prestige Blender upright with the
blender jug, lid and inner lid assembled and in-
serted on the motor base or beside it. Do not place
anything on top.
E
39