SOLIS PRESTIGE 837 Mode D'emploi page 38

• To stop blending at any time, press the 'Stop'
button or the selected function button. The
'Power' button can also be pressed, but this will
also turn the appliance off and all illuminations
will go out.
• The maximum amount of ice cubes the blender
can blend at any one time is 1 standard ice tray
or 250g.
Step 10.
For ingredients that require short bursts of power,
select the 'PULSE' function. The 'PULSE' button will
illuminate and remain illuminated while the button
is depressed. When this function is selected, the LCD
timer screen will illuminate and count upwards in one
second increments during pulsing. Press the 'PULSE'
button in short bursts until blending is complete.
Use the 'PULSE' button when the food that is being
processed is too thick or coarse to circulate within
the blender jug.
Step 11.
At the end of use, always ensure the blender is
turned off by pressing the 'Power' button on the
control panel. Then unplug the cord. Ensure the
DISASSEMBLING YOUR BLENDER FOR CLEANING,
CARE AND STORAGE
Step 1.
Always ensure the Solis Prestige Blender is off
by pressing the 'Power' button on the control panel.
Then switch off at the power outlet and unplug the
power cord.
E
Fig. 1
38
motor and blades have completely stopped before
attempting to move the appliance, or when the Solis
Prestige Blender is not in use and before disassemb-
ling, cleaning and storing.
• During the blending process, ingredients may
stick to the sides of the blender jug. To push the
food back onto the blades, press the 'Power'
button on the control panel and remove the
power cord. Remove the lid and use a plastic
spatula to scrape down the sides of the jug.
Replace the lid before recommencing blending.
• If any moisture or liquid appears on top of the
motor base during blending, press the 'Power'
button on the control panel, and remove the
power plug. Remove the blender jug. Wipe the
motor base immediately with a dry cloth or
paper towelling to absorb the liquid. Check the
blender jug is correctly assembled.
• Never place anything other than food and
liquids in the Solis Prestige Blender whilst the
motor is running.
Never place anything other than
food and liquids in the Solis Prestige
Blender whilst the motor is running.
Step 2.
Remove the blender jug from the motor base by
grasping the handle and lifting the jug in an
upward direction.
Step 3.
Remove the blade assembly by upturning the
blender jug and twisting the Blade Removal System
clockwise to unlock (see Fig 1), then lift upwards
and away from the base of the blender jug. The
circular plastic surround attached to the base of the
blender jug is not removable.
Step 4.
Remove the silicon seal from the blade assembly.
The Solis Prestige Blender features a Blade Removal
System for the easy removal of the blade for cleaning.