Plug the mini USB plug on the recharging
2
cable included with the train into the mini
USB socket on the train.
The USB plug for the charging cable included
with this set may only be connected to a
charging device from Protection Class II
(example: from a cell phone charger), which
is provided with the following symbol:
The red light in the train will be on during the
charging process.
The charging time with the cable included
with the train is approximately 3 hours.
The train is recharged when the red light in
the train goes out.
After the rechargeable battery is fully char-
3
ged, the charging cable must be removed
from the train and the charging device.
The train can be run approximately 2.5 hours
with a complete charge in the battery.
7. Track to build
Put together
*
* The USB charger
is not included
in the package
contents!
Disassemble
Ideas for setting up the track (see Construction
Steps Page 35):
13