Leica V-LUX 5 Mode D'emploi page 80

Recording
■
Marker
When selecting and saving pictures from a 4K burst file, you can select pictures easily
by skipping between marked positions.
White marker: This is manually set during recording or
playback.
Green marker: This is automatically set by the camera
during recording. (Auto Marking function *
*
1
The camera automatically sets markers on scenes in which a face
or the movement of a subject is detected. (Up to 10 markers are
displayed for each file.)
(Example: At the scene when a vehicle passes by, a balloon
bursts, or a person turns around)
■
Skip to the marked positions
When [ ] is touched, the marker operation screen appears. You can use
to a marked position to select a picture.
Touch [ ] to return to the original operation.
• In the following cases, markers may not be set by the Auto Marking function
depending on the recording conditions and the status of subjects.
– The camera is moving because of panning or jitter
– The movement of a subject is slow/small, or the subject is small
– A face is not facing front
■
Select markers to be displayed
Touch [ ]
Settings: [Auto] / [Face Priority] / [Motion Priority] / [Off] *
*
2
Displays manually set markers only
80
)
1
Marker operation screen
2
to skip