Handlebar Control Unit; Control Buttons; Turning The System On; Setting The Assistance - Batavus E-go RemovE Guide D'utilisation

______________________________________________________________________

3.2 Handlebar control unit

3.2.1 Control buttons

A System on/off
B Assistance level adjustment
C Assistance level adjustment
D Light on/off
E Mode selector

3.2.2 Turning the system on

You can turn the assistance on and off by keeping button 'A' depressed. You can do this at
any time, also while cycling.
The system switches off automatically if it is not used for more than 10 minutes.

3.2.3 Setting the assistance

Programmes Select
programme
Eco Low-level Keep button
assistance 'B' or 'C'
depressed
Speed High- Keep button
level assistance 'B' or 'C'
depressed
Both the cycling programme and the assistance level can be readjusted at any
time, even while cycling. Both are shown on the right side of the display.

3.2.4 Speed readout

The cycling speed is shown in the middle of the display.
_________________________________________________________________________
31
Assistance level
Three power levels.
Assistance provided up to a
maximum of 25 km/h
Six limited speeds
S1 = max. 14 km/h
S2 = max. 16 km/h
S3 = max. 18 km/h
S4 = max. 20 km/h
S5 = max. 23 km/h
S6 = max. 25 km/h
10
E
D
C
A
B
Select assistance
level
Button 'C' = more
Button 'B' = less
Button 'C' = more
Button 'B' = less