Batavus E-go RemovE Guide D'utilisation page 28

______________________________________________________________________
2.2.2 Recharging
1. Check whether the recharger is suitable for the local voltage that your power company
supplies.
2. Connect the recharger to the mains socket.
3. Now make the other connections:
When you ..............
have removed the battery from the
chain guard
want to recharge the battery without
removing it from the chain guard
4. The indicator light on the recharger will now light up. It will take approximately five hours
to completely recharge the battery pack. Once the battery pack is fully recharged,
recharging will stop automatically and the indicator light will turn green.
5. Disconnect the battery pack within 24 hours after it has recharged.
6. Remove the recharger cable and remove the plug from the mains socket.
_________________________________________________________________________
28
then................
place the battery onto the adaptor,
insert the charging plug into the adaptor;
remove the lock cover and insert the
charging plug into the display connector.
7