Handlebar Control; Display; Information; Disconnecting And Securing - Batavus E-go RemovE Guide D'utilisation

______________________________________________________________________

3 Handlebar control

3.1 Display

3.1.1 Information

Paragraph 3.2 describes which pieces of information can be read on the display and how
they can be requested.

3.1.2 Disconnecting and securing

You can remove the display by rotating it to the
left and then pulling it towards you.
Even during 'sleep mode', your E-go
RemovE consumes energy.
To prevent damage to the battery, the
display should be removed whenever the bicycle
is not in use. Paragraphs 2.2.3 and 2.2.4 provide
detailed instructions for protecting and storing the
battery.

3.1.3 Adjusting position

The position of the display can be adjusted by using the
screws that hold it in place (S).
_________________________________________________________________________
30
®
S
9