Service, Maintenance And Care; Malfunctions; Transport; Disposal - diversey TASKI ergodisc 2000 Mode D'emploi

Service, maintenance and care

Maintenance of the machine is a pre-condition for trouble-free running and a
long life.
Caution:
Always unplug the mains plug from the main socket when carrying
out any maintenance work!
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
 = after use,  = every week,  = every month
Activity
Check the motor ventilation for the collection of
dust and clean when necessary
Check/change the dust bag
Clean the pads and let them dry
Clean the machine with a damp cloth
Service intervals
TASKI machines are built to the highest quality standards, and their safety is
tested in the factory and by authorised inspectors. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
• In order to maintain operational reliability and availability for use, the service
must be carried out after 250 working hours or at least once a year.
Shorter interval may be necessary under rough or extreme working
conditions and / or insufficient maintenance.
Service centre
Should you contact us due to a malfunction or for placing an order, please
always state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the
address of your nearest TASKI partner can be found on the last page of this
manual.

Malfunctions

Malfunction Possible causes
No power supply
Machine does not The foot pedal is not
unlatched.
work
Safety switch defect
Machine has
Machine cannot
overheated causing
be operated, but
motor protection
the switch is on
switch (trip) to cut in.
Motor runs, but not
the tool
Pad does not
rotate
Electrical component
defective.
Machine is
overloaded
Machine does not
reach rated
speed, motor
Insufficient voltage,
protection cuts in
power cord is too long
Machine runs Pad is deformed or
uneasy damaged
  
page
10
12
12
12
Troubleshooting page
• Connect the power
supply cord to the 11
mains socket
• Unlatch the foot pedal.
11
• Contact your Service
partner
• Wait a while, try again
(the protection switch
will automatically
reset)
• Drive belt is torn or
lose
• Contact your service
partner
• Contact your service
partner
• Check if you are using
the correct working 11
technique
• Remove extention
• Check power supply
voltage
• Replace pad
11

Transport

• Bring the machine into the transport position.
The foot pedal must be latched in.
Lifting the machine
Option A: To lift the machine, hold the machine by the handle while a
second person holds the back of the housing.
Option B: To lift the machine, both persons should hold the machine by
the handle and the back of the housing.
A
Ensure that the machine is firmly lashed down and secured in the transport
vehicle.

Disposal

When they are no longer serviceable, the machine and its accessories must be
disposed off in a professional manner in accordance with the national
regulations. Your TASKI partner can help you here on request.

Technical data

Machine
type
Working width
Dimensions (L x W x H)
Machine weight
Rated voltage
Rated power
Frequency
Power supply cord length
Pad rotation speed
Pad pressure
Max. pad thickness
Assessed sound level LPA according to
ISO 11201
The assessed effective acceleration value
according to ISO 5349-1
Splash water protection
Electrical protection class

Accessories

Article
7521297 Disposable dust bag
B
2000
2000HSP
50 cm
108x59x119 cm
54 kg
220-240V AC
100-120V AC
1500 W
50 Hz
60 Hz
25 m
2000 min-1
0.045 N/cm2
30 mm
70 dB(A)
<2.5 m /s2
IPX0
I
X
13