Service, Maintenance And Care - diversey TASKI swingo 350B Mode D'emploi

Masquer les pouces Voir aussi pour TASKI swingo 350B:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 128
Cleaning the water distributor
Notice:
Clean the brush whenever cleaning work
is completed.
• Place the machine on the parking
A
support.
A: For traction batteries; use the
parking support on the right
B: For lithium-ion batteries; use the
parking support on the left
B
• Remove the recovery tank from the
machine.
• Remove the hoses from the lid of the
water distributor.
X
• Remove the lid (1) and the water dis-
1
tributor (2).
2
• Clean the lid (1) and the water distrib-
utor (2) under running water.
Cleaning the machine
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
• Wipe the machine with a moist cloth.
Storing / parking the machine (not in operation)
Attention:
The machine must be switched off (main
switch) and the battery disconnection plug
must be disconnected.
• Place the machine on the parking
A
support.
A: For traction batteries; use the
parking support on the right
B: For lithium-ion batteries; use the
parking support on the left
B
• Store the machine with open tank
cover. This enables the tank to dry,
and the generation of mold and un-
pleasant odors is prevented.
74
Attention:
Never store the machine with discharged
batteries. Otherwise, the batteries will be
damaged beyond repair.

Service, maintenance and care

The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Signs and symbols:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Draining and cleaning the recovery and
fresh water tank
Check the intake and suction filter for
contaminations and clean them
Clean all yellow marked parts
Clean the brushes
Clean the suction nozzle / squeegee,
check the blades for wear and change
them, if necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check them for cracks and replace
them, if necessary
Maintenance and service program car-
ried out by Diversey service techni-
cians
67
72
73
72
74

Publicité

Table des Matières
loading

Table des Matières