Overview; Working Position; Transport Position - diversey TASKI ergodisc 2000 Mode D'emploi

Overview

1
2
3
27
4
5
6
7
Machine handle
1
Height adjustment lever
2
Cable hook
3
Tool foot pedal
4
Supporting wheels
5
Wheels
6
Disposable dust bag
7
Tools (pads)
8
Tool cover
9
Protective profile
10
Foot pedal for parking position (tool up)
11
Foot pedal for working position (tool down)
12
Suction hose
13
Pad drive
14
Machine positions
Park/Move position

Working position

10
23 22 21
26 25
8 9
• Pull the height adjustment lever and slowly
lift the guide pillar until it is in the upright
position.
• The foot pedal must latch into place (tool
up).
• Pull the height adjustment lever on the
machine handle and slowly lower the guide
pillar to a comfortable working position.
• Lower the tool by unlocking the foot pedal
(tool down).
20
24
10 11 12
Pad fixation
15
Cable lead-throough
16
Cable insert (for UK and NA with special plugs)
17
Main (ON/OFF) switch
18
Safety switch
19
Right operating lever (Motor ON/OFF)
20
Height adjustment lever lock (for free movement of the central steel pillar)
21
Height adjustment lever
22
Operating lever left (Motor ON/OFF)
23
Power supply cord
24
Cord support
25
Cover for dust bag compartment
26
Motor cover
27

Transport position

Pad change position
19 18
13 14
• Press the height adjustment lever and
swivel the guide pillar forwards until it lies
against the engine cover.
• The foot pedal must latch into place (tool
up).
• Bring the machine into the transport
position.
• Lie the machine on its back by holding it
with your foot at the rear.
17
16
15