Original Ec Declaration Of Conformity - diversey TASKI ergodisc 2000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Caution:
Please make sure that the voltage stated on the machine label is
the same as the voltage rating of the plug socket!
Caution:
Danger of injury due to sharp objects.
The personal protection is based on the national regulations!
Important! Switch the machine off when you:
• carry out cleaning, maintenance or repair work, replace components or
change to another function
• store it in a suitable room to avoid any unauthorised use of the unit
• leave it standing without supervision
Do this by pulling the power supply cord out of the mains socket.
Store the machine in a dry, dust-free room with a corrosion-free atmosphere.
The temperature must not fall below +10 °C or exceed +35 °C. Low
temperatures, damp and dust can significantly reduce the service life of the
electrical components.
Noise emissions and vibrations:
TASKI machines and units have been designed so that any
danger to health through the noise emitted or through vibrations
can be excluded according to the current state of knowledge.
Refer to the technical information on page 13.

Original EC Declaration of Conformity

We hereby declare that the product described below conforms to the relevant
safety and health-related requirements of the appropriate EU Directive, in both
its design and construction, as well as in the version that we market.
This declaration shall cease to be valid if modifications are made to the product
without our approval.
Designation:
Floor treatment an cleaning machines for commercial
use
Product:
Single disc machine
Model:
ergodisc 2000
Model:
2000HSP
Serial number:
refer to the rating plate on the machine
Trademark:
Manufacturer:
Diversey Europe Operations B.V. - 1083 HJ Amsterdam
- Netherlands
Applicable EU Directives:
Directive 2006/42/EC | Directive 2004/108/EC
Harmonised standards applied:
EN 60335-1 / EN 60335-2-67 / EN 62233 / EN 55014-1 / EN 55014-2 /
EN 61000-3-2 / EN 61000-3-3
Internal measures ensure that the products conform to the requirements of
current EU Directives and relevant standards at all times
Responsible for documentation:
Angelo Sabatino
Mgr Regulatory Affairs
Diversey Switzerland Services GmbH
Eschlikonerstrasse
9542 Münchwilen TG
Download Link for the original EU Declaration of Conformity:
http://www.espares.diversey.com/manuals
9

Publicité

Table des Matières
loading

Table des Matières