PERFECTPRO Workbox Mode D'emploi page 28

Snooze
. When the alarm sounds, press any button other than the Power
button will silence the alarm for 5 minutes. "SNOOZE" will a
pear on the display.
2. To adjust the silence time for the snooze timer, press the Menu
button to enter the menu setting.
3. Rotate the Tuning control until "SNOOZE X" shown on the dis-
play, then press the Tuning control to enter the setting. Rotate
the Tuning control to adjust the silence time. There are 5, 0, 5
and 20 minutes for the snooze timer. Press the Tuning control
to confirm the setting.
4. To cancel the snooze timer while the alarm is suspended, press
the Power button.
Timer
. Press the Timer button to enter the menu setting. Repeatedly
press and release the Timer button and the options will increase
in 5 minute increments from 5 to 20 minutes. Alternatively, ro-
tate the Tuning control to adjust the timer in  minute increment.
2. Stop when the required Timer option appears on the display
and press the Tuning control to confirm the setting. The remain-
ing time of an active timer setting will show on the display.
3. Press the Timer button to view the remaining time of an active
timer setting. To cancel a sounding timer, press Power button.
If any button other than the Standby button is pressed when
the alarm sounds, snooze function will be activated. To cancel
the function when countdown is progressing, go to timer setting
menu and select 'OFF'.
GB
26