PERFECTPRO Workbox Mode D'emploi page 19

Recalling a preset station- FM/AM
. Press the Power button to switch on the radio.
2. Press and release the required waveband by pressing the
Source button.
3. Press and release the required Preset button to cause your
radio to tune to the station stored in preset memory.
Listening to music via Bluetooth streaming
You need to pair your Bluetooth device with your radio before
you can auto-link to play/stream Bluetooth music through your
WORKBOX. Paring creates a `bond' so two devices can recognize
each other.
Pairing your Bluetooth device for the first time
. Press the Power button to switch on the radio.
2. Press the Source button to select the Bluetooth mode. The
Bluetooth status indicator (
show the radio is discoverable.
3. Activate Bluetooth on your device according to the device's user
manual to link to the speaker. Locate the Bluetooth device list
and select the device named 'WORKBOX' With some mobiles
(which are equipped with earlier versions than BT2. Bluetooth
device), you may need to input the pass code "0000".
4. Once connected, the Bluetooth icon will remain in solid blue.
You can simply select and play any music from your source
device. Volume control can be adjusted from your source
device, or directly on your radio.
7
) on the panel flashes blue to