PERFECTPRO Workbox Mode D'emploi page 25

4. Rotate the Tuning control to set the desired hour. Then press
the Tuning control to confirm the setting. The minute digit will
flash on the display.
5. Rotate the Tuning control to set the desired minute. Then press
the Tuning control to confirm the setting.
Setting date manually
. Press the Menu button to enter the setting menu. Rotate the
Tuning control until 'DATE SET' shows on the display. Press the
Tuning control to enter the setting.
2. Rotate the Tuning control to adjust the year. Then press the
Tuning control to confirm the setting. The month digits will flash.
3. Press the Tuning control to adjust the month. Then press the
Tuning control to confirm the setting. The date digits will flash.
4. Rotate the Tuning control to adjust the date. Then press the
Tuning control to confirm the setting. Now the date setting is
completed.
Change 12/24 hour clock format
. Press the Menu button to enter the setting menu. Rotate the
Tuning control until 'CLOCK 24 (or 12)' shows on the display.
Press the Tuning control to enter the setting.
2. Rotate the Tuning control to choose between 2 or 24 hour
clock format. Press the Tuning control to confirm the setting.
Change date format
. Press the Menu button to enter the setting menu. Rotate the
Tuning control until current date (e.g. 30 AUG) shows on the
display. Press the Tuning control to enter the setting.
2. Rotate the Tuning control to choose your desired format. Press
the Tuning control to confirm the setting.
23