PERFECTPRO Workbox Mode D'emploi page 23

Pairing and playing your device via NFC
WORKBOX is equipped with wireless
NFC (Near Field Communication) feature,
allowing playing NFC-enabled devices to
pair and play the music. For non-NFC devices,
please refer to the above sections for standard
Bluetooth pairing.
. Turn on your NFC feature on your device. (Important: Please
make sure the screen of your playing device is on and
unlocked to allow NFC to work.)
2. Touch the NFC area of your playing device against the NFC
area marked on top panel of WORKBOX. The unit will switch
to Bluetooth mode and enter automatic pairing . If you pair with
WORKBOX for the first time, your NFC-enabled device will be
asked the permission to link with the radio. Once paired with a
device, the Bluetooth icon will remain illuminated.
3. Use the controls on your device or on your radio to play/ pause
and navigate tracks.
Note:
. If you would like to link another Bluetooth device for the first
time via NFC, disconnect the existing linked Bluetooth device
first.
2. The location of the NFC detection area is not the same on all
devices. When connecting with other Bluetooth device via NFC,
refer to the User guide of the other device for more information.
3. Some of metallic case or cover for mobile phones may reduce
the sensitivity of NFC. Make sure you remove it, before
activating the NFC.
Disconnecting your NFC-enabled device
To disconnect your device, simply touch it again on the top of
the unit. The LED light for Bluetooth icon will then start to flash
indicating your radio is discoverable again for pairing.
(Important: Please make sure the screen of your playing device is
on and unlocked to allow NFC to work.)
2