PERFECTPRO Workbox Mode D'emploi page 27

4. Rotate the Tuning control to choose the required alarm type, and
then press the Tuning control to confirm the setting. The alarm
can be set to buzzer, FM or AM. When radio mode is selected,
the radio frequency on the display will begin to flash. Rotate the
Tuning control to adjust the required radio frequency or press the
corresponding preset button to select the required preset number
for the alarm, then press the Tuning control to confirm the setting.
5. Rotate the Tuning control to select the required alarm volume
and press the Tuning control to confirm the setting. The alarm
has now been set. Symbol for active alarm (such as
shown on the display.
When the alarm sounds
When the buzzer alarm activates, the alarm will start softly and grad-
ually increase in level.
When the radio alarm is activated, the alarm will go off in Humane
Waking System.
To deactivate a sounding alarm, press the Power button to cancel a
sounding alarm.
Disabling/cancelling alarm setting
To cancel the alarm setting, press and hold the corresponding alarm
button before the alarms sound off.
25
or ) is