ABB BEHA OTOMASYON ACS 850 Guide Rapide page 6

www.behaotomasyon.com
Quick Start-up Guide for ACS850 with Standard Control Program 5
To adjust a parameter within an assistant:
• Use the and
setting shown and to proceed to the next parameter.
To adjust a parameter at any other time:
• In the Main menu, highlight PARAMETERS and press
• Use and
group and press
• Highlight a parameter and press
• Use and
shown. Press EXIT twice to return to the Main menu.
Notes for more complicated edits:
• With parameters that define a digital source, the setting Const can be used to fix the
value to constant 1 (C.TRUE) or 0 (C.FALSE).
• With parameters that define an analog or digital source, the setting Pointer can be
used to freely choose any parameter value (analog) or a specific bit of a packed
boolean parameter (digital) as the source:
• With an analog source, the parameter group
and parameter index are specified. After
selecting the group, press NEXT to move to the
index setting.
The text below the cursor reflects the current
setting.
After setting the index, press SAVE to accept
the value. Press CANCEL at any point to
discard any changes and to return to the
parameter list.
• With a digital source, the parameter group,
parameter index, and bit number are specified.
After setting an item, press NEXT to move to
the next.
The text below the cursor reflects the current
setting.
After the bit number is set, press SAVE to
accept the value. Press CANCEL at any point
to discard any changes and to return to the
parameter list.
By default, the language of the text shown is English. If desired, the language can be
changed as follows.
In the Main menu, make sure PARAMETERS is
highlighted, and press ENTER.
www.behaotomasyon.com
keys to adjust the setting. Press SAVE to accept the
to browse the list of parameter groups. Highlight the desired
(SEL) to display the parameters within that group.
(EDIT) to adjust the setting.
to adjust the setting. Press SAVE to accept the setting
Changing the language
(ENTER).
LOC PAR EDIT
1501 AO1 src
P.01.06
0106 Motor torque
CANCEL
LOC
PAR EDIT
1002 Ext1 start in1
P.02.01.00
0201 DI status
CANCEL
LOC
MAIN MENU
PARAMETERS
ASSISTANTS
CHANGED PAR
EXIT
SAVE
NEXT
1
ENTER