Hofmann monty 3300racing AT Notice D'utilisation page 8

Tires and Rims that are not the same diameter are mismatched.
• • • • •
NEVER attempt to mount or inflate any tire and rim that are mismatched.
• • • • •
ALWAYS check to see that tire and rim diameters are the same.
A mismatched tire and rim will explode causing death or serious personal injury
Over-pressurized tires can explode causing flying debris.
• • • • •
Read and understand Operator's Manual before operating.
• • • • •
Keep bystanders away from work area.
• • • • •
ALWAYS wear Safety Goggles.
• • • • •
ALWAYS check to see that Tire and Rim diameters are the same.
• • • • •
NEVER attempt to mount or inflate any Tire and Rim with different diameters.
• • • • •
Inspect tires, NEVER inflate tires that are damaged, rotten or worn.
• • • • •
NEVER inflate 'Split Rim Wheels' on this tire changer, remove them and use only an approved
safety inflation cage designed for this purpose.
• • • • •
Lock turntable Clamp on inside of rim before attempting to inflate tire.
• • • • •
Use approved tire bead lubricant before removing or installing tire on rim.
• • • • •
ALWAYS position the "Safety Restraint Arm" over the wheel to hold it to the turntable while
inflating if so equipped.
• • • • •
If a tire explodes on this tire changer, STOP using it until the "Safety Restraint Arm" has been
replaced, which must be done even if no damage is seen.
• • • • •
NEVER place head or body over a tire during inflation process.
• • • • •
Use short bursts of air to seat tire beads, check tire air pressure frequently.
• • • • •
NEVER exceed tire manufacturer's pressure limits.
• • • • •
NEVER attempt to bypass or alter the built in air pressure limiter. Only inflate tire with air hose
supplied with tire changer. NEVER use shop inflation hose to inflate a tire.
• • • • •
Tire Changer must be anchored to concrete floor if equipped with a "Safety Restraint Arm"
Exploding Tires can cause serious injury.
8
monty 3300racing AT
USA - CANADA