Olivetti d-Copia 1600 Mode D'emploi page 63

OPERATION GUIDE
Setting the Margin
Use the procedure given below to change the Margin.
1 Press [Margin] for 3 seconds. The System
Menu for the Margin will be displayed.
2 Press or
[Inch specifications]
0.13/0.25/0.38/0.50/0.63/0.75("): the range in which the margin can
be set.
[Metric specifications]
A margin from 1 to 18 (mm) can be set.
3 Press [OK]. The display will blink and the copier will return to the state
where copying can be continued.
and select the binding margin width.
Copying Functions
43.Stitch Width
1mm
4-9