System Menu Operations Procedures - Olivetti d-Copia 1600 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

System Menu
Items
51.Auto Sleep
52.AutoClearTime
53.LowPower Time
54.AutoSleepTime
55.Alarm
56.CoverageRepo

System Menu Operations Procedures

OPERATION GUIDE
Description
The Auto Sleep mode will be entered after a set
period of time has passed after the final copy has
been produced or during which no operations have
been performed.
If the Auto Sleep function interferes with your copy
operations, disable the function. Before disabling the
Auto Sleep function, you may want to try lengthening
the amount of time before the Auto Sleep function
engages (Sleep Mode Transition Time).
Sets the time interval prior to the automatic operation
of the Auto Clear function when On (Enable) has
been selected as the 50.Auto Clear setting.
This will not be displayed when 50.Auto Clear is set
to Off.
Sets the time interval prior to the automatic
engagement of the Low Power mode after copy
operations have been completed.
Sets the time interval prior to the automatic operation
of the Auto Sleep function when On (Enable) has
been selected as the 51.Auto Sleep setting.
This will not be displayed when 51.Auto Sleep is set
to Off.
The Alarm can be set to sound when a key on the
Operation Panel is pressed or in cases when errors
occur, etc.
Prints out a report that shows the number of copies
made and the average amount of toner used
(blackness ratio %) for each paper size.
Follow the procedure listed below to operate in the System Menu.
1
Press [Exposure Adjustment] on both
sides for 3 seconds. System Menu will be
displayed.
2
Press
or
and select System Menu Items.
NOTE:
Each of System Menu Items can be selected by pressing the
numeric keys.
Refer to "Procedure for Changing the Default Settings" regarding the
following.
3
After completing each operation, press
done.
System Setting
Reference
Available settings
On: Enabled*
5-21
Off: Disabled
10 to 270 (10-second
5-21
units) (*90)
1, 5, 15, 30, 45, 60, 90,
5-22
120, 180, 240 (minutes)
(*15)
1, 5, 15, 30, 45, 60, 90,
5-22
120, 180, 240 (minutes)
(*30)
On: Enabled (sound
5-23
alarm)*
Off: Disabled (no alarm)
---
5-23
System Menu:
00.Setting done
or
to display 00.Setting
Page
5-7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

D-copia 2000

Table des Matières