Sony FLEXICART BFC-1 Mode D'emploi page 27

Appendix
Errors that may occur in the CK-39 board [K39-
Errors that may occur in common memory [RAM-
28 (E)
****
Error messages have the following format:
****
K39-
****
where " " indicates an error code.
Error codes and their meanings are listed below.
Error codes and their meanings
Fatal errors
0011: No reference video signal is input to the board.
0012: The board is not ready for operation.
****
Error messages have the following format:
****
RAM-
****
where " " indicates an error code.
Error codes and their meanings are listed below.
Error codes and their meanings
Fatal errors
CP18: The Flexicart cannot access common memory on the CPU-118
board.
DP17: The Flexicart cannot access common memory on the DP-178 board.
RD24: The Flexicart cannot access common memory on the RD-24 board.
F496: The Flexicart cannot access common memory on the IF-496 board.
Note
This message also appears to indicate a necessary board (except for the IF-
373 boards) that is not installed in the Flexicart.
Pressing the CONTROL key displays one slot number after another if two
or more necessary boards are not installed.
Non-fatal errors
F731: The Flexicart cannot access common memory on the first IF-373
board.
F732: The Flexicart cannot access common memory on the second IF-373
board.
F733: The Flexicart cannot access common memory on the third IF-373
board.
F734: The Flexicart cannot access common memory on the fourth IF-373
board.
]
]