Sony FLEXICART BFC-1 Mode D'emploi page 15

Preparations
Start-Up and Turning-Off
Cassette Loading and Removal
16 (E)
This section explains the necessary preparation prior to Flexicart operation
as follows:
• Loading and removing video cassettes
• Setting the VTR parameters
Load/remove cassettes into/from the Flexicart as follows:
1
Press the DOOR OPEN key.
The elevator rises and stays in its uppermost position automatically.
The Flexicart releases its door lock.
2
Open the door and load/remove the cassettes.
Each shelf can hold two S-VHS standard cassettes or S-size cassettes
on the right and left; three DVCAM standard cassettes on the right,
center, and left; or one cassette of any other size.
3
Close the door.
Note
The Flexicart allows you to load/remove cassettes even if the VTRs are in
use. The VTRs in the Flexicart can operate regardless of whether the
Flexicart's door is open or closed.
The elevator, however, does not move while the door is open. Close the
door as soon as cassette loading/removal is finished.