Emerson WELLAND CF610VS00 Manuel Du Propriétaire page 16

BP7495 CF610 Welland.qxp_ BP7495 3/10/15 4:21 PM Page 16
5. How to Wire Your Ceiling Fan
5.5
Screw the two threaded studs (supplied) into the
tapped holes in the hanger bracket (Figure 25).
5.6
Lift the ceiling cover up to the threaded studs and turn
until studs protrude through the holes in the ceiling
5.7
cover (Figure 26).
Secure the ceiling cover in place by sliding lockwashers
over the threaded studs and installing the two knurled
knobs (supplied). (Figure 26).
Tighten the knurled knobs securely until the ceiling
cover fits snugly against the ceiling and the hole in the
ceiling cover is clear of the downrod.
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
WARNING
!
(Continued)
THREADED
STUDS (2)
Figure 25
Figure 26
16
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
E.T.L. Model No.: CF610