Renkforce MS-60i Notice D'emploi page 40

"Settings"
"Date & Time"
"Alarm"
"Language"
Here, you can choose your desired menu language. The following menu languages are supported: English;
German; French; Dutch; Russian; Swedish; Norwegian; Danish
40
"Set Date and Time"
Here, you can set the date and time. Observe that this is usually done automatically
once the internet radio is connected to the internet. To change the setting, use either
the buttons 0 to 9 (D0 – D9) or the four arrow buttons (C5 – C8).
"Set Time Format"
Select the time format 12 or 24 hours here.
"Set Date Format"
Select the desired format for the date here. You have the following options: DD/MM/
YYYY (day/month/year) (standard); YYYY/MM/DD (year/month/day); MM/DD/YYYY
(month/day/year).
"Daylight Saving Time (DST)"
Switch summer and winter time recognition on or off here.
"GMT(15:07)"
This displays the current "Greenwich Mean Time".
"Alarm 1 (Turn Off)"
Here, you can make all settings for alarm 1. See chapter 10 f) of these instructions on
how to proceed in detail.
"Alarm 2 (Turn Off)"
Here, you can make all settings for alarm 2. See chapter 10 f) of these instructions on
how to proceed in detail.
"NAP Alarm (Turn Off)"
In this menu item, you can choose the time during which the radio is to wake you up.
However, the only alarm sound available here is a bleep. You can set the time to 5,
10, 20, 30, 60, 90 and 120 minutes.
"Alarm Volume"
Set the alarm volume here. This applies to all functions of the device.